Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Blaupunkt Bremen MP74 owners to properly answer your question. View the manual for the Blaupunkt Bremen MP74 here, for free. This manual comes under the category Car Radios and has been rated by 1 people with an average of a 6.
This manual is available in the following languages: English. Below, you will find the most frequently asked questions about the Blaupunkt Bremen MP Is your question not listed? BremenMP74 d BremenMP74 d letz. Ask a question. Your device is equipped with a detach- The device switches off after the able control panel flip-release panel as control panel is detached.
Page Volume Mute You can find out from your Blaupunkt announcement after the call is finished dealer which navigation systems can be in so far as the traffic announcement is used with your car sound system. If you do, you must Set the volume level that you want specify which device is connected to this using the volume control 2.
You You can adjust the display settings to can set the X-Bass boost for one of the suit the installation position in your ve- following frequencies: 32 Hz, 40 Hz, 50 hicle and your own preferences. When setting the display illumination, Move the flashing selection marker you can choose one of four preset col- behind DAY or NIGHT by pressing ours or mix a colour yourself from the the joystick 8 to the left or right.
Press the softkey 5 assigned to The settings are saved. In the following menu you can set Configuring the spectrum the red, blue and green colour Many of the receivable You can invert the appearance of the FM stations broadcast a signal that not display content. You can connect one or two antennas to the device.
You can allow radio texts to ducing interference noise during poor be displayed or you can block them. Due to the varying quality of CD If a CD is already inserted in the blanks, Blaupunkt cannot guarantee device, that this will work properly. If your software does not provide this feature you also have the option of sorting the files manually.
To do so, you T should place a number e. Selecting from the directory list If, for instance, you are listening to You can display a list of all the directo- tracks in directory D01 and you se- ries on the inserted CD and then con- lect the next directory by pressing veniently select a directory from it. Page Configuring The Display MP3 MODE rectory from being repeated, until the display that you want ap- pears in the bottom line of the repeatedly press the softkey 5 display.
If the information on the artist, track and album is not available in the form of an Configuring the display You can briefly play scan all the tracks on the CD.
You can also set menu. Calibration begins as soon as any of the softkeys that are de- the countdown is finished. If you want to select the equalizer view Proceed as described for all the without equalization, equalizers. To ensure optimum seconds. As its starting point it uses a Proceed in the same way for all the volume level that is considered pleas- loudspeakers and press the joy You can connect a subwoofer and a The phase setting can be adjusted in centre speaker to this device.
Press the NEXT button 4. We recommend changer. The default text for the selected input Press the softkey 5 assigned to appears in the display. All custom settings will Output power: 4 x 18 watts sine then be cleared.
Page 50! Page 52! Page 54! Page 55! You also get a self-aligning equalizer that uses a special microphone included to analyze the acoustic environment inside your car and set the player accordingly.
A strong on-board amplifier is on hand to drive your speakers, while three sets of preamp outputs make it easy to connect your external amps and subs. The center channel preamp output lets you create a 5. A subsonic filter removes inaudible low frequencies to ensure cleaner performance, and you can even switch off the internal amplifier to cut down on system noise when using an external amplifier. With optional adapters, you can add two extra inputs for your satellite radio, iPod, or other portable sound source.
You'll even be able to get station titles or genre information displayed right on the faceplate. The Bremen rounds it out with a variable-color graphic display to light up your dash with a library of more than 4, background colors, ensuring your custom sound always looks great.
Blaupunkt Bremen MP74 owner's manual. Average review: 3 reviews. Thanks for taking the time to share your experiences with other customers. Please see our review guidelines for help and information.
By submitting this review, you agree to our terms and review guidelines. The receiver has two antenna inputs, allowing you to use the vehicle's OEM antenna plus the supplied windshield antenna.
In the Setup menu, you can configure the receiver for one antenna or two. HiCut Function: The HiCut function improves the sound during poor radio reception by automatically reducing the treble level to one of two levels: HiCut 1 minor treble reduction and HiCut 2 maximum treble reduction , or turn off the Hi Cut function HiCut 0. Adjustable Scanning Time: You can activate the scan function to briefly play all the receivable stations.
You can set the scanning time between 5 and 30 seconds. Ignition Off Turn-On: The unit can be turned on manually even if the ignition is turned off. The receiver will stay on in this mode for approximately one hour and will automatically shut itself off to avoid running down the battery. Turn-On Volume Settings: In the menu, you can select one of two volume settings when the power is turned on. You can select a preset turn-on volume between 0 and 50, and the volume will always be set to that level when the unit is turned on.
You can also set the power-on volume to be the same as the volume level that was active before the unit was switched off. Navigation Volume: If you connect a navigation system to this unit, you can adjust the volume of the navigation commands as it is mixed with the audio source. You can choose one of four preset colors Ocean, Amber, Sunset, and Nature , scan through all available colors, or set a custom display color of your choosing.
When selecting a custom color, you can use the unit's softkeys to select one of 16 values of Red, Green, and Blue, giving you a possibility of colors.
Vario-Colour Button Illumination: Similar to the display illumination, you can select one of 16 possible colors for the button illumination. The unit offers 8 values of green and red, and as the concentration of one color increases, the other color decreases value.
Display Options: In addition to setting the color of the display and button illumination, you can activate a spectrum analyzer display providing a symbolic representation of the receiver's output. You can also invert the appearance of the display, letting you select either a negative or a positive display. Display Brightness: You can independently set the brightness of the display for day and night operation. The brightness for each mode can be set between 1 and Note: Night operation can be activated if the orange illumination wire is connected to the vehicle's headlight circuit.
When recording the discs, you can create a maximum of directories on a CD. Each directory can contain up to tracks and subdirectories. Subwoofer Output: This unit has a single mono preamp output for a subwoofer. In the Menu, you can make the following adjustments:. Center Channel Output: The unit has a single mono preamp output for a center channel. When Auto is selected, the frequency is adjusted to suit the value you set for the low-pass filter.
Built-In Amplifier: If you are powering your audio system using all external amplifiers, you can turn off the unit's internal amp, if desired. You can enter custom names for the sources you connect to Aux 1 and Aux 2 to make them more easily recognizable. It provides you with 3 self-calibrating user equalizers EQ1, EQ2 and EQ3 , each consisting of a band graphic equalizer and four separate channels: front left, front right, rear left and rear right. EQ1 is used for the driver only, EQ2 for the driver and a front passenger, and EQ3 for front and rear occupants.
By using the supplied microphone, the equalizers can be calibrated and EQ values automatically set, or the graphic EQ settings can be adjusted manually. The values of the vehicle's acoustics can be viewed with or without equalization. These presets are added to the settings of the active user EQ to give you optimal sound for each music type.
This gives you the impression you are standing right in front of a stage. You can select from the following Stage Effects: Left driver only , Right passenger only or Front driver and passenger. Sound Effects: You can choose between five different Sound Effects for your music, each reproducing the ambience and reverberations found in each setting: Cathedral, Theater, Concert, Club, and Stadium. The volume is boosted by a different amount for each frequency band depending on how noise develops in the vehicle.
Noises that last only a short time, such as crossing railroad tracks, are not taken into account. The supplied microphone allows you to calibrate the DNC system and continually monitor the level of sound in the vehicle. Remote Control. It is a "Thummer"-type remote designed to be attached to the steering wheel so it can be operated by the driver's right thumb.
The IR emitter is located on the back of the remote. Since the receiver does not have an infrared sensor on the faceplate, the supplied IR sensor needs to be mounted on the dash and connected to the rear input on the receiver.
The remote requires two "" Silver Oxide watch-type batteries supplied. Functions: The RC 10 remote has the following buttons:.
Inputs And Outputs Notes. Microphone Input: If you are using the supplied microphone for the Digital Sound Adjustment or Dynamic Noise Covering functions, the two metal contacts on the wires will need to be inserted into the 9 and 10 pinout slots of the supplied pink Molex plug. If you are using the remote control and the preamp output harness, you'll need to remove the yellow plug from the IR sensor and substitute the yellow plug from the preamp output harness before plugging them into the back of the head unit.
Antenna Connections: The unit has two European-style antenna inputs on the back panel for use with the vehicle's OEM antenna and the supplied windshield-mount antenna. There are European-to-Motorola antenna adapters supplied for each input. If you are connecting only one antenna, it should be connected to the lower input.
If you are connecting two antennas, the main antenna OEM is connected on the lower input. For free personalized advice, call Our Advisors have listened to most of the speakers we carry, and can help you make the best choice for your system.
Close contact box. Call See our hours Our hours Hours 7 days a week. Looking for International Support? Connect ID. What is Connect ID? Call us at Your advisor will be able to share relevant pages and add items to your cart.
Your security and privacy are ensured. Our advisors cannot see anything that is on your computer. They only have the ability to "serve" a page from our site and put items in your cart. All finished with your chat session? Continue chat Close. Why is this required? Phone Please enter your US phone number.
0コメント