A8v asus driver

Asus A8V, problem booting from sata or seeing other sata drives. DaRkBlAd3 Weaksauce. Joined Aug 6, Messages Hey guys, i just splurged and purchased the Asus A8V. I swapped out my old mobo, and put in the A8V and my brand new The changeover went fine, but the problems started as soon as i turned it on as they usually do. It shows the little booting graphic, then scans for drives. This is where it says "Hardware Initiate Failed, Check Cables or something to that effect " Then, under this it says "Bios Not Installed" which confuses me to death because i am able to get into the bios.

So i press 'g' and it scans for something else now, i assume the other sata chip, it then finds my raptor system disk , then after that screen it asks which flavor of windows i want to load, i select the correct one and press enter, then it sits at a blank screen for a few seconds, then reboots! So i go into the bios and look around, i have both onboard sata chips enabled i have 1 raptor true sata , and 2 ide drives using sata convertors, and 1 ide drive using ide.

This brings me to my next dilemma, where can i see what sata drives it detects?! The only drives i've ever seen it list in bios is the 1 ide drive, which does me no good. Luckily i'm at work so i don't have the temptation to smash the thing to bits, but this is driving me nuts. Does anybody have any suggestions?

I plan on updating the bios during lunch today, i would've done it last night, but i let my friend borrow my floppy drive and without being able to boot to windows, i have to have it. So my friend is bringing it over during lunch, and i'm going to attempt to update the bios, but i'm not sure that will even help.

I really hope this is just a setting in the bios that i'm missing, and not a physical problem Thanks for your time. Joined Jun 23, Messages Hmm, you moved all your drives without a clean install of the OS I presume. My suggestion would be - install only the drive with the OS on it and see if it can fix the issues. Move it from one controller to the other as needed. Looks to me like the bios or drivers for one of the chips are missing, and that is probably the one you have the OS hanging off.

Joined Oct 18, Messages 15, Moving to a different mainboard was probably not appreciated by Windows. Windows NT including 2k and XP never showed much flexibility in detecting hardware changes, especially low-level stuff.

You can probably just install on top of the current installation, so that it'll only install the right drivers for this mainboard. Joined Jul 23, Messages 2, Bios not installed means no drive attatched to whatever controller you are trying to use thats why its giving loose cable message Dont know about asus bios but you have to put boot order from sata, disable raid, enable SATA, boot partition on drive active, correct jumpers, and put drive on correct connectors.

Did you format drive from before - what was old mobo? Edit: I'm fairly sure its because you have raid enabled somewhere - only one drive RAID will also give you hat message.

Update the asus p5vd2-vm se motherboard drivers for windows 10 with ease. Before you start installing the motherboard, and hardware devices on it, check. Asus p5vd2-vm bios driver download, by, asustek computer inc, size, refer to or user manual for memory qvl qualify vendor list beta, asus a8v-e se bios , asus p5vd2-vm-se bios Phoronix test suite. Hp compaq socket. Download best selling motherboards see, hp paq desktop pcs, hp p5lp le mere.

Now, wait and let the operating system download and install ASUS motherboard drivers on your Windows computer. After the successful installation of motherboard drivers, do not forget to reboot the system. Basically, motherboard is a piece of computer hardware that connects all the parts of a computer, including CPU, memory, hard drives, optical drives, video card, sound card and so on.

Now, when we talk about updating motherboard drivers, we are mainly talking about all the device drivers on our computer.

Of all the drivers, chipset drivers and graphics card drivers are the most important ones. In the following post, we will show you exactly how to update chipset drivers and graphics drivers in detailed instructions on Windows Click to expand it. Xsus Snooping [Disabled] When set to [Enabled], the palette snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly. Page 65 Allows you to disable or set the onchip VGA frame buffer size.

Table Of Contents Table of contents Notices Page 13 This chapter describes the motherboard features and the new technologies it supports. Save the BIOS file to a bootable floppy disk. In 4-channel and 6-channel configuration, the function of this port becomes Front Speaker Out. The following sub-sections describe the slots and the expansion cards that they support.

Comments to this Manuals Your Name. Page 4 Creating a bootable floppy disk Exit Menu To set a User Password: The number of ssus items that appears on the screen depends on the number of devices installed in the system. The figure shows a network card installed on the PCI Express x1 slot. Asus Ez Flash Utility 2. Furthermore, installing the wrong ASUS drivers can make these problems even worse.

These are not jumpers!